Compared with SKD11, DC53 tool steel has five excellent practical characteristicsKeywords: DC53, SKD11, DC53 tool steel, DC53 toughness, DC53 heat treatment, SKD11 heat treatment(1) Machinability and good abrasion.The machinability and the abrasion are better than SKD11, so the tool life is longer a...

SKH-51 high speed steel overview:Also known as wind steel or front steel, it means that it can harden even when it is cooled in air during quenching, and it is very sharp. It is an alloy steel with a complex composition containing carbide-forming elements such as tungsten, molybdenum, chromium, vana...

1.2379 is a high-carbon and high-chromium steel in the laisenite. It has high wear resistance and toughness, strong impact resistance, sharp edges maintain good performance and retain tempering, and can be nitrided after special treatment.1.2379 is suitable for all kinds of cold punching dies with h...

1.2344 Main features:1. Uniform material, excellent cutting performance and polishability2. High toughness and high plasticity3. High thermal fatigue resistance and wear resistance4. Excellent overall hardenability5. Good high temperature strength6. Very low deformation rate during heat treatment7. ...

M2 high-speed steel processing and processing:M2 high-speed steel annealing: the holding time should be more than 3~4 hours, after the heat preservation, it can be cooled to below 500°C at a rate of 10~20°C/hour, or it can be cooled to 740~760°C and stay for 4~6 hours , Isothermal annealing metho...

The use of DC53:1. Chong die, cold forming die, cold drawing die2. Forming roll and punch3. Precision blanking and stamping dies for various applications4. Plastic deformation tools for difficult materials Performance comparison of DC53 and SKD11:1. DC53 is improved on the basis of SKD11. After heat...